hardware/daq DataAcquisition The hardware section describes the settings of the used hardware. There should be one hardware section for each hardware item that was used. SerialNo string The device's serial number. InventoryNo string The inventory number of the device. Model string The model name of this hardware item. Manufacturer string The Manufacturer of this hardware item. Owner string Who's the owner of the device. AIResolution int The voltage resolution of the analog input (AIN) subsystem given in bit. AIMaxSampleRate float Hz The maximum sampling rate. AIChannelCount int The number of input channels of the DAQ-device. AOResolution int The voltage resolution of a data-acquisition analog output (AO) subsystem given in bit. AOMaxSampleRate float Hz The maximum sampling rate. AOChannelCount int The number of output channels of the device. DIOLineCount int The number of digital input/output lines (DIO) of the device. AIUsedChannelCount int The number of used analog input channels. AISampleRate int Hz The sample rate with which an individual input channel was sampled. Given in Hz. AIChannelGain float The gain of an input channel. AIReference string The reference to which voltages were measured. Usually either "common ground" or "differential". AIPolarity string The polarity of the measurement "unipolar" or "bipolar". AOUsedChannelCount int The number of used analog output channels. AOSampleRate int Hz The sample rate with which an individual output channel was sampled. Given in Hz. AOChannelGain float The gain of an output channel. Description string A description of this hardware item.